News & Events

The structure of the gear

Update:22 Jul 2020
Summary:

Each machine requires different parts, but gears are used in many machines. The structure of the gear. Gear teeth are abbreviated as teeth, which are each convex part of the gear used for meshing. These convex parts are generally arranged in a radial pattern. The teeth on the mating gears are in contact with each […]

Each machine requires different parts, but gears are used in many machines. The structure of the gear.

  1. Gear teeth are abbreviated as teeth, which are each convex part of the gear used for meshing. These convex parts are generally arranged in a radial pattern. The teeth on the mating gears are in contact with each other, so that the gears can continuously mesh and run.
  2. Cogging is the space between two adjacent teeth on the gear;
  3. The normal plane refers to the plane perpendicular to the tooth line of the gear tooth;
  4. Addendum circle refers to the circle where the top of the tooth is located;

 

  1. The tooth root circle refers to the circle where the groove bottom is located;
  2. The base circle is a circle that forms the involute line for pure rolling;
  3. The index circle is the reference circle for calculating the geometric dimensions of the gear in the end face;
  4. The end face is on a cylindrical gear or cylindrical worm, and is perpendicular to the axis of the gear or worm.

 

OTT worm gear

Gear teeth, normal surface, tooth space, addendum circle, tooth root circle, base circle, index circle, and end surface are all components of the gear. These components need to be clearly understood by everyone. This is also the knowledge of gears. Basics, so don’t underestimate the gear. Each product exists for a reason. The reason why gears have long held a place in the market is because many productions cannot do without gears.

PREV:       It is the last article

http://bonusveren.net https://viagrasatinalma.com https://resmikamagrajel.com/ https://cialishapsatis.com https://www.sanal-eczanem.com/